Proliferation is a critical part of cellular function, and a common readout used to assess potential toxicity of new drugs. Measuring proliferation is, therefore, a frequently used assay in cell biology. Here we present a simple, versatile method of measuring proliferation that can be used in adherent and non-adherent cells.
The ability of a cell to proliferate is integral to the normal function of most cells, and dysregulation of proliferation is at the heart of many disease processes. For these reasons, measuring proliferation is a common tool used to assess cell function. Cell proliferation can be measured simply by counting; however, this is an indirect means of measuring proliferation. One common means of directly detecting cells preparing to divide is by incorporation of labeled nucleoside analogs. These include the radioactive nucleoside analog 3H-thymidine plus non-radioactive nucleoside analogs such as 5-bromo-2’ deoxyuridine (BrdU) and 5-ethynyl-2′-deoxyuridine (EdU). Incorporation of EdU is detected by click chemistry, which has several advantages when compared to BrdU. In this report, we provide a protocol for measuring proliferation by the incorporation of EdU. This protocol includes options for various readouts, along with the advantages and disadvantages of each. We also discuss places where the protocol can be optimized or altered to meet the specific needs of the experiment planned. Finally, we touch on the ways that this basic protocol can be modified for measuring other cell metabolites.
Proliferation is a critical part of cellular function1,2. Control of proliferation influences normal processes such as development, and pathologic processes such as cancer and cardiovascular disease. Hyperplastic growth of vascular smooth muscle cells, for example, is thought to be a precursor to atherosclerosis3. Changes in cell proliferation are also used to assess potential toxicity of new drugs. Given its widespread impact, measuring proliferation is a mainstay of many cell biology-based laboratories.
Cell proliferation can be measured by simply counting cells if the cell population of interest divides fairly rapidly. For slower growing cells, cell counts may be less sensitive. Proliferation is often measured by incorporation of labeled nucleoside analogs. Although the gold standard is 3H-thymidine incorporation, many laboratories are getting away from this method given the availability of newer, non-radioactive alternatives. These include cytoplasmic fluorescent dyes, detection of cell cycle associated proteins, and incorporation of non-radioactive nucleoside analogs such as 5-bromo-2’ deoxyuridine (BrdU) and 5-ethynyl-2′-deoxyuridine (EdU)4.
Cytoplasmic dyes, such as carboxyfluorescein diacetate succinimidyl ester (CFSE), detect proliferation because the intensity of the dye halves each time the cell divides5. This technique is commonly used in flow cytometry for non-adherent cells. It has not been used much for adherent cells, but with the new generation of imaging plate readers this may change. Detection of cell cycle associated proteins through antibody-based techniques (flow cytometry, immunohistochemistry, etc.) is often used for tissues or non-adherent cells. These cells/tissues must be fixed and permeabilized prior to staining. Nucleoside analogs BrdU and EdU are similar in approach to 3H-thymidine, but without the inconvenience of radioactivity. Incorporation of BrdU is detected by anti-BrdU antibodies, and therefore cells must be fixed and permeabilized prior to staining. In addition, cells must be treated with DNase to expose the BrdU epitope.
Incorporation of EdU is detected by click chemistry, in which alkyne and azide groups “click” together in the presence of catalytic copper. Either group can serve as the biosynthetically incorporated molecule or detection molecule4. Commercially available nucleoside analogs have the alkyne group attached. For proliferation assays, therefore, the alkyne functionalized nucleoside analog is detected by an azide conjugated to a fluorescent dye or other marker. Incorporation of EdU has several advantages over BrdU. First, because alkyne and azide groups are not found in mammalian cells, this interaction is highly specific with a low background6. Because both groups are small, cells do not need to undergo DNA denaturation to expose the nucleoside analog as required for BrdU7. Finally, click chemistry is highly versatile, and can be used for the metabolic labeling of DNA, RNA, protein, fatty acids, and carbohydrates8,9,10,11. If the metabolically labeled target of interest is on the cell surface, live cells can be labeled12. In addition, cells can be further processed for immunofluorescent staining with antibodies.
The following protocol describes the use of EdU incorporation and click chemistry to measure proliferation in human vascular smooth muscle cells (Figure 1). We show three different ways incorporation of EdU can be measured, representative results from each, and their advantages and disadvantages. Measuring proliferation via click chemistry is particularly useful for adherent, slower growing cells. In addition, the morphology of the cell is well maintained and antibody-based staining can also be performed.
1. Detection of EdU using fluorescent label
2. Detection of EdU using luminescence
In Figure 2, we demonstrate the outcomes of three different experiments measuring proliferation of VSMC in response to PDGF. After growing the cells in media formulated for SMCs, we carried out the experiment in serum free DMEM, to eliminate any potential effects of serum or growth factors on proliferation. In Figure 2A we compare results, from the same experiment, using a fluorescent vs luminescent readout. To read these plates, we used a multimode microplate reader that can read absorbance, fluorescence, and luminescence (see Table of Materials).
Using the plate reader in scanning well mode, fluorescent readings are averaged over the entire well. This mode alleviates potential inaccuracies due to differences between the center and edges of the well. However, if very few nuclei are positive, reading results in this way likely underestimates the “number” of positive cells when only a few are positive. Number, with this readout, means fluorescence relative to that of another well, and not exact cell numbers. In addition, if there is a fiber or a clump of dead cells that picks up fluorescence, this will be included in the area scan. However, the advantage of using the plate reader is time. While reading in scanning mode takes 15−20 seconds per well, it is automated as opposed to the personal time-intensive method of taking pictures and analyzing them using imaging software.
To correct potential underestimates from the above method, we converted the fluorescent scan to a homogenous, liquid readout in which cells taking up EdU are detected with an azide-biotin moiety, which is in turn detected with streptavidin-horseradish peroxidase (see Figure 1). The amount of horseradish peroxidase is then quantified using a standard substrate formatted for ELISA. The advantage of this technique is a more homogenous readout, and Figure 2A,B shows examples of experiments where this method was employed. In addition, the plate can be read in seconds. There are disadvantages to this method, however. First, the background with this method is higher than with fluorescence. To decrease the background, we incorporated a blocking step and multiple washes. As a reflection of this background, negative controls (untreated cells) tend to be higher, and the fold increase in proliferation is lower. Second, as with the fluorescence readout, any fibers or dead cells that pick up the detection reagents will add to the total luminescence.
In an attempt to decrease variability in the above experiments, we normalized our results to initial cell counts. For proliferation assays, normalization has to be done on live cells at the beginning of the assay before the cells divide. In addition, the assay cannot affect cell function or incorporation of EdU. Given these constraints, we chose to use metabolism as a reflection of cell number via resazurin14. Results with and without normalization are shown in Figure 2B. However, in a separate set of experiments we found that this method is not sensitive enough to detect small differences in cell numbers. In addition, any error in this readout introduces more error in the entire experiment. For these reasons, we have elected to take extraordinary care to plate cells as evenly as possible, and not perform a normalization step.
To be sure we were getting the most accurate results possible, we reverted to fluorescent staining (section 1) and counting cells using an inverted fluorescence microscope. The advantage of this method is that one can physically see and count the positive cells, ensuring the most accuracy (Figure 3). Any fluorescent debris can be excluded from the count. Background counts without EdU are 0 as there is no visible fluorescence, and therefore no background to subtract. The main disadvantage of this method is time. To count nuclei in cells plated in a 96 well plate, we take 3 pictures per well of both EdU positive cells and total cells (DAPI), requiring 6 images per well. We take pictures vertically from the midsection of the top to the bottom of the well, taking care not to overlap and count cells twice. Counting total cells gives us a second piece of data that confirms our proliferation results. However, in light of the relatively slow doubling time of VSMC (36−48 h), the fold increase in total cells stimulated with PDGF vs controls is much lower than the fold increase of EdU positive cells, which is why we measure incorporation of EdU (Figure 2C).
The most efficient and accurate way to count EdU positive and total cells is by using an imaging plate reader. This method combines the accuracy of counting with the speed of automation. The main drawback is that this piece of equipment is not available at every institution. In comparing automated vs manual counts, the EdU positive manual count was essentially identical to the automated count (Figure 2C, left), as were the total unstimulated counts (Figure 2C, right). However, the manual count was lower than the automated count in total PDGF-stimulated cells. This difference likely relates to cell growth patterns. Because the cells tend to grow in the center of the well, with smaller numbers the automated and manual counts were nearly identical. However, with higher numbers there were likely more cells at the edges and the manual counts, which did not capture cells at the periphery of the well, were less accurate.
Figure 1: Overview of EdU detection by fluorescence or luminescence.
VSMC or other adherent cells are treated under conditions of interest. EdU is added for the last 24 h of the culture period and incorporated into the DNA of dividing cells. Incorporated EdU is then detected using fluorescence (protocol section 1) or luminescence (protocol section 2). Please click here to view a larger version of this figure.
Figure 2: Measuring proliferation with different readouts using incorporation of EdU and click chemistry.
(A) VSMCs were cultured in the presence or absence of PDGF. EdU was added the last 24 h of culture, and incorporation was detected by either fluorescence (protocol section 1) or luminescence (protocol section 2). (B) VSMCs were treated as described in panel A, and incorporation of EdU was measured by luminescence. Results were normalized to initial cell counts using resazurin viability assay. (C) VSMCs were treated as in panel A, and incorporation of EdU was measured by fluorescence. EdU positive cells were counted automatically, using an imaging plate reader, or manually by imaging and then counting using imaging software. Results shown are the average ± standard deviation of 3–6 replicates per treatment.
Figure 3: Visualization of EdU positive cells following click fluorescence protocol.
VSMC were treated as described in Figure 2, and incorporated EdU was detected using fluorescence (protocol section 1). Each image is a single well of a 96 well plate. Total nuclei are shown in blue (DAPI) and EdU positive nuclei are green. Scale bar = 50 µm. Please click here to view a larger version of this figure.
Incorporation of EdU is a simple, straightforward way to measure cell proliferation; it is particularly useful for adherent cells13. Our protocol uses smooth muscle cells, but it is applicable to any adherent cell (epithelial, endothelial, etc.). Although the protocol is not complicated, the one critical step is making the labeling solution — the ingredients must be added in the order listed. In addition, like chemiluminescent Western blots, if using the luminescence readout the plate must be read immediately.
Several parts of the protocol can be modified or optimized as needed. One part is the duration of incubation with EdU. Because our goal was to detect as many proliferating cells as possible, we added EdU for a full 24 h prior to fixing and staining. However, this timing likely measures cells in both S and G2/M phases. To label only cells in S phase, Cecchini et al. advise that even slowly dividing cells be incubated with EdU for no longer than 6 hours7. Another part of the protocol that can be optimized is the amount of chelator. Alkyne-azide reactions require a copper catalyst (CuSO4). THPTA is a copper chelator that maintains copper in the necessary oxidation state. The ratio of chelator to copper can be varied, to increase alkyne-azide binding. We observe bright staining with a chelator:copper ratio of 2:1, in the context of also using picolyl azide. The picolyl moiety adds chelating activity which decreases the concentration of copper needed and increases the efficiency of the reaction15. Chelator:copper ratios can be increased, usually up to 5:1, to optimize per investigator needs. A better chelator, 2-[4-({bis[(1-tert-butyl-1H-1,2,3-triazol-4-yl)methyl]amino}methyl)-1H-1,2,3-triazol-1-yl]acetic acid (BTTAA), is now commercially available16. This chelator was not commercially available when we first derived this protocol. Finally, although we use paraformaldehyde as a fixative in this protocol, cells can be fixed with methanol, which also obviates the permeabilization step. Fixing with methanol can be helpful if one wants to combine immunofluorescent staining of specific cellular proteins with incorporation of EdU.
One drawback of this method is the potential cytotoxicity of EdU, particularly when continuously labeling with EdU for days as opposed to a pulse label of hours. Depending on the cells used, EdU has been found to cause cell cycle arrest or even apoptosis17. This toxicity is thought to be due to defective DNA replication from the addition of artificial nucleosides18. Studies have shown this toxicity to be cell line dependent and concentration dependent17. We did not observe any problems with toxicity in our studies.
In summary, measuring proliferation via EdU and click chemistry has several advantages over other commonly used methods such as BrdU or 3H-thymidine incorporation. These include avoiding radioactivity, high specificity with low background, and no need for harsh denaturation steps. Once established, click chemistry is highly versatile, and can be easily modified for the metabolic labeling of RNA, protein, fatty acids, and carbohydrates.
The authors have nothing to disclose.
We thank Katie Carroll for technical assistance. We also thank Dr. David Cool and the Proteomics Analysis Laboratory for instruction on and provision of the Cytation imaging plate reader. This work was supported by a Wright State Foundation grant (to L.E.W.).
5-Ethynyl-2'-deoxyuridine | Carbosynth | NE08701 | |
biotin picolyl azide | Click Chemistry Tools | 1167-5 | |
CuSO4 | Fisher Scientific | C1297-100G | |
Cy3 picolyl azide | Click Chemistry Tools | 1178-1 | |
Cytation Plate Reader | Biotek | ||
EVOS Microscope | Thermo Fisher Scientific | ||
Hydrogen peroxide solution | Sigma-Aldrich | 216763 | |
Na ascorbate | Sigma-Aldrich | 11140-250G | |
NucBlue Fixed Cell Stain Ready Probes | Invitrogen | R37606 | DAPI nuclear stain |
Odyssey Blocking Buffer | Li-Cor | 927-40000 | blocking buffer |
Paraformaldehyde | Electron Microscopy Services | 15710 | |
PBS | Fisher Scientific | SH3002802 | |
Sodium Chloride | Sigma Life Science | S3014-5kg | |
Streptavidin Horseradish Peroxidase Conjugate | Life Technologies | S911 | |
Super Signal ELISA Femto | Thermo Scientific | PI137075 | ELISA substrate |
Synergy Plate Reader | Biotek | ||
THPTA | Click Chemistry Tools | 1010-100 | |
Tris Hydroxymethyl Aminomethane Hydrochloride (Tris-HCl) | Fisher Scientific | BP153-500 | |
Triton X 100 | Bio-Rad | 1610407 | |
Tween 20 | Fisher Scientific | BP337-100 |