Summary

Een flow-through Exposure System voor het evalueren van sedimenten in suspensie Effecten op Aquatic Life

Published: January 09, 2017
doi:

Summary

A robust and flexible flow-through exposure system designed to maintain sediment in suspension is presented. The system is used to investigate the effects of suspended sediment on various aquatic species and life stages in the laboratory.

Abstract

This paper describes the Fish Larvae and Egg Exposure System (FLEES). The flow-through exposure system is used to investigate the effects of suspended sediment on various aquatic species and life stages in the laboratory by using pumps and automating delivery of sediment and water to simulate suspension of sediment. FLEES data are used to develop exposure-response curves between the effects on aquatic organisms and suspended sediment concentrations at the desired exposure duration. The effects data are used to evaluate management practices used to reduce the interactions between aquatic organisms and anthropogenic causes of suspended sediments. The FLEES is capable of generating total suspended solids (TSS) concentrations as low as 30 to as high as 800 mg/L, making this system an ideal choice for evaluating the effects of TSS resulting from many activities including simulating low ambient levels of TSS to evaluating sources of suspended sediments from dredging operations, vessel traffic, freshets, and storms.

Introduction

Baggerwerken gebruiken mechanische methoden tot sedimentlagen van havens en vaargeulen te verwijderen. Tijdens het verwijderen, wordt een deel van de verstoorde sediment opgeschort in de waterkolom, mogelijk waardoor dit een bron van fysieke stress in het water levende soorten. Naast het feit dat opgeschort, het sediment kunnen worden uit de buurt van het baggeren door omgevingsomstandigheden voordat hij zich uit de kolom water vervoerd. De combinatie van deze twee mechanismen betekent dat aquatische organismen optreedt nabij een functionerend bagger kan worden blootgesteld gesuspendeerde sedimenten en lijden bijwerkingen. Om dergelijke problemen, milieu ramen (seizoensgebonden baggeren beperkingen) worden routinematig gebruikt als management praktijk te verminderen of te elimineren risico van mogelijk schadelijke effecten van zwevende sedimenten uit baggeractiviteiten op aquatische hulpbronnen 1,2 pakken.

Milieu-ramen worden meestal vastgesteld als bescherming bedreigd, bedreigd ofcommercieel waardevolle soorten zoals de snoekbaars (Sander vitreus) en Oost-oester (Crassostrea virginica) 3. De ondersteunende gerechtvaardigd milieueisen vensters vaak gericht hoe bagger activiteiten kan mogelijk fysiek verstoren (bv sediment) van een dier in staat is om een specifiek deel van de levensgeschiedenis voltooien. De levensfasen vaak aangehaald zijn eieren en larven voor het houden van migratieroutes geopend voor anadrome soorten 3. Echter, er is weinig informatie over soortspecifieke biologische effecten aan sediment 4,5 beschikbaar om te informeren met behulp van milieu-windows als een risico management tool relevant.

Om deze redenen werd de vlooien ontworpen, gebouwd en gebruikt om de opschorting van sediment te simuleren, en de effecten daarvan op de vroege levensstadia van aquatische organismen te bepalen. Vlucht studies gebruiken fijnkorrelig sediment deeltjes (dat wil zeggen, voornamelijk slib,klei en fijn zand) die waarschijnlijk in suspensie te blijven en migreren verst van de bron. De vlucht kan testen viseieren en larven, maar het kan ook worden ingebouwd in andere waterorganismen plaats, waardoor het een unieke mogelijkheid. De verkregen biologische respons gegevens kunnen vervolgens worden gebruikt om de effecten van zwevende sedimenten beoordelen. De volgende procedures geven een overzicht van hoe de technologie kan worden gebouwd en geëxploiteerd om herhaalbare sediment concentraties en effecten van gegevens met behulp van verschillende aquatische soorten opleveren.

Protocol

Alle vlucht experimenten met gewervelde dieren werden uitgevoerd onder de juiste Engineer Research and Development Center (ERDC) Environmental Laboratory Institutional Animal Care en gebruik protocollen. 1. vlucht Modules, Water Bath en Aquaria Het verkrijgen van houten palen, studs en multiplex voor de bouw van de module. Construct de modules (in aantal en grootte) vergelijkbaar met een eenvoudige werkbank om onderzoek doelstellingen te bereiken. Snijd de multiplex (0,12…

Representative Results

Een reeks operationele runs uitgevoerd voor het begin van een experiment dat de vlucht levert de juiste concentraties van sedimenten elk aquarium (paragrafen 5.5 en 6.2). Figuur 6 illustreert hoe NTU concentraties in experimentele aquaria worden gehandhaafd doel sediment concentraties te bereiken. In dit voorbeeld, vlooien geëvalueerd of sediment gedurende drie dagen met de voorgestelde proef sediment, een blootstellingsduur typisch voor deze experimenten simuleren typi…

Discussion

De vlucht technologie verbetert bestaande methodes 4,9 van onderhoud en beheer sedimenten in suspensie in uiteenlopende belichtingstijden en sediment door gebruikmaking van een geautomatiseerd, computergestuurd systeem. De technologie is flexibel zodat deze kan worden gebruikt om de effecten van zwevende sedimenten meerdere aquatische soorten en ontwikkelingsstadia verschillende grootte van eieren volwassenen afhankelijk van de gewassen. In de toekomst, de technologie is geschikt om sediment effecten waterpla…

Disclosures

The authors have nothing to disclose.

Acknowledgements

This research was funded by the U.S. Army Corps of Engineers Dredging Operations and Environmental Research Program, Todd Bridges, Director. Permission was granted by the Chief of Engineers to publish this material.

Materials

Parts List for one FLEES Module, Water Bath, and Aquarium
post, wood – used to build module (cut to 78 in) Local vendor N/A Quantity: 4
Size: 4 in x 4 in x 8 ft
plywood, marine grade – fastened to wooden posts about 18 in off ground – for holding water bath (60 in x 42 in) Local vendor N/A Quantity: 1
Size: 3/4 in x 4 ft x 8 ft
plywood – fastened on top of wooden posts – for holding pipes, solenoids and electrical (60 in x 42 in) Local vendor N/A Quantity: 1
Size: 1/4 in x 4 ft x 8 ft
stud, wood – used to brace plywood and wooden posts (cut to fit) Local vendor N/A Quantity: 4
Size: 2 in x 4 in x 96 in
tank, fiberglass – water bath with two drains: 1) to supply chiller; and 2) to drain water Hydro Composites, LLC, Stockdale, TX, USA FBT-226 Quantity: 1
Size: 150-gal
chiller, water with self contained pump – for water bath; chiller sits under module Remcor Products Co., Glendale Heights, IL, USA CFF-500 Quantity: 1
Size: 1/2 hp
tank, domed bottom – FLEES aquaria – sit inside water bath United States Plastic Corp, Lima, OH, USA 5197 Quantity: 5
Size: 19 L
tank, stand – acrylic stand, 12 in x 12 in x 6 in – to hold aquaria custom built by ERDC shops N/A Quantity: 5
Size: custom
urethane, liquid- to seal carboy plug and prevent leaking Forsch Polymer Corporation, Englewood, CO 60A Liquid Urethane Quantity: 5
Size: epoxy kit
pump, magnetic drive – to suspend sediment in each aquarium March Manufacturing Inc., Glenview, IL, USA MDX-3-1/2 115 v Quantity: 5
Size: 28 liter per min
light, LED – installed over water bath C2 Development, Inc., Ames, IA, USA Hydra 26 Quantity: 2
Size: based on area to light
pipe, PVC schedule 40 – installed in drain of water bath to control water level Local vendor N/A Quantity: –
Size: 1 in
fittings, bulkhead – for aquaria/water bath connections to pumps, drains, water and slurry lines Lifegard Aquatics, Cerritos, CA, USA R270900 Quantity: 20
Size: 1/2 in FPT x FPT
fittings, quick-disconnect, male pipe threaded inserts – insert in tank bulkhead Cole-Parmer, Vernon Hills, IL, USA EW-31303-36 Quantity: 10
Size: 1/2 in MPT
fittings, quick-disconnect, valved hose barbs – connection between aquarium and insert in tank bulkhead Cole-Parmer, Vernon Hills, IL, USA EW-31303-11 Quantity: 10
Size: 1/2 in
fittings, black HDPE threaded elbow – for aquaria vinyl tube connections to slurry/water line and pump United States Plastic Corp, Lima, OH, USA 62043 Quantity: 20
Size: 1/2 NPT x 1/2 in Hose ID
fittings, black HDPE threaded adapter – for connections between pump and tank bulkhead United States Plastic Corp, Lima, OH, USA 62017 Quantity: 10
Size: 1/2 NPT x 1/2 in Hose ID
tube, vinyl – connect slurry/water line to aquaria and to connect pumps to aquaria Local vendor N/A Quantity: 25 ft
Size: 1/2 in ID
tube, vinyl – connect to aquaria drains inserts and water bath drain Local vendor N/A Quantity: 25 ft
Size: 5/8 in ID
clamp, hose, stainless steel – to clamp vinyl tube to hose barbs Local vendor N/A Quantity: 40
Size: #8
Name Company Catalog Number Comments
 
Parts list for Slurry System
 
chiller, water with self contained pump – sits off to side of slurry tank Remcor Products Co., Glendale Heights, IL, USA CFF-500 Quantity: 1
Size: 1/2 hp
125 gallon open top cone bottom tank w/Stand – 42 in x 35 in – contains the water and sediment to make slurry United States Plastic Corp, Lima, OH, USA 8586 Quantity: 1
Size: 125 gal
Cover for 125 gallon tank United States Plastic Corp, Lima, OH, USA 8935 Quantity: 1
Size: 42 in x 35 in
valve, PVC – connect tank drain to pump – isolate for maintenance local plumbing vendor N/A Quantity: 2
Size: 1-1/2 in
pump, double diaphragm mounted on stand – used to recirculate slurry Wilden-pumps.co.uk & Air Pumping Ltd., Essex, UK P2/PPPP/WF/WF/PTV/400 Quantity: 1

contact distributor
sensor, optical backscatter – measure NTU in slurry tank Campbell Scientific, Logan, UT, USA OBS-3+ Quantity: 1
Size: 0-1000 NTU
pipe, PVC Schedule 40 – to recirculate slurry local plumbing vendor N/A Quantity: 20 ft
Size: 1 in
pipe, flexible PVC – fitted with union and used to connect to next module local plumbing vendor N/A Quantity: 10 ft
Size: 1 in
union, PVC Schedle 80 Socket – connect slurry line with next module local plumbing vendor N/A Quantity: 8
Size: 1/2 in
solenoid, plastomatic (normally closed) – introduce slurry Plast-O-Matic Valves, Inc., Cedar Grove, NJ, USA EASYMT4V12R24-PV Quantity: 5
Size: 1/2 in NPT threaded, 24 VAC
contact distributor
fitting, PVC tee – connect slurry pipe with solenoid local plumbing vendor N/A Quantity: 5
Size: 1 in x 1 in x 1 in slip x slip x FIPT
fittings, 1 in PVC ball valve threaded – shut off for slurry delivery to solenoid/water lines local plumbing vendor N/A Quantity: 7
Size: 1/2 in
fittings, 1 in PVC union threaded – connect slurry solenoid to shut off valve local plumbing vendor N/A Quantity: 5
Size: 1/2 in
tube, vinyl – connection between water solenoid and slurry solenoid Local vendor N/A Quantity: 50 ft
Size: 1/4" ID
Name Company Catalog Number Comments
 
Parts list for Water System
 
chiller, water with self contained pump – sits off to side of reservoir Remcor Products Co., Glendale Heights, IL, USA CFF-500 Quantity: 1
Size: 1/2 hp
125 gallon open top cone bottom tank w/Stand – 42 in x 35 in – contains the water and sediment to make slurry United States Plastic Corp, Lima, OH, USA 8586 Quantity: 1
Size: 125 gal
Cover for 125 gallon tank United States Plastic Corp, Lima, OH, USA 8935 Quantity: 1
Size: 42 in x 35 in
valve, PVC – connect tank drain to water pump local plumbing vendor N/A Quantity: 2
Size: 1 in
pump, magnetic drive, in-line use – used to recirculate water to aquaria and chiller Little Giant, Fort Wayne, IN, USA 3-MD-SC Quantity: 1
Size: 1/12 hp
solenoid, alco – introduce water discontinued; ASCO, Florham Park, NJ,USA for similar N/A Quantity: 5
Size: 24 v, 1/4 in NIPT
fittings, black HDPE reducer connector – connect 1/4 in hose water line from solenoid  to 1/2 in hose local plumbing vendor N/A Quantity: 5
Size: 1/2 in hose ID x 1/4 in hose ID
fittings, black HDPE tee – connect 1/2 in hose water line and slurry to aquaria local plumbing vendor N/A Quantity: 5
Size: 1/2 in NPT x 1/2 in hose ID x 1/2 in hose ID
fittings, street elbow local plumbing vendor N/A Quantity: 5
Size: 1/2 in 90° MIPT x FIPT
fittings, PVC threaded pipe nipples – connect union fittings with solenoids and other connections local plumbing vendor N/A Quantity: 12
Size: 1/2 in
fittings, union threaded – connect slurry/water lines with next module local plumbing vendor N/A Quantity: 6
Size: 1 in PVC 
fittings, reducer bushing – connect to reducer tee in water line local plumbing vendor N/A Quantity: 5
Size: 1/2 in male by 1/4 in female FIPT
fittings, threaded pipe nipples – connection between bushing and water solenoid local plumbing vendor N/A Quantity: 5
Size:  4 in long  x 1/4 in 
pipe, PVC  – make connections between tank, pump and chiller local plumbing vendor N/A Quantity: 5 ft
Size: Schedule 40
Name Company Catalog Number Comments
 
Parts list for Sensors, Data Acquisition Device, and Computer Software
 
software, LabView National Instruments, Austin, Texas, USA LabView 2015 Base Quantity: 1
Size: N/A
SCXI-1001 12-Slot Chassis, U.S. 120 VAC National Instruments, Austin, Texas, USA 776571-01 Quantity: 1
Size: N/A
SCXI 1100 – 32-Channel, ±10 V Analog Input Module National Instruments, Austin, Texas, USA 776572-00 Quantity: 1
Size: N/A
SCXI 1303 – Terminal block designed for high-accuracy thermocouple measurements National Instruments, Austin, Texas, USA 777687-03 Quantity: 2
Size: N/A
SCXI 1102B – 32-Channel Thermocouple/Voltage Input Module National Instruments, Austin, Texas, USA 776572-02B Quantity: 1
Size: N/A
SCXI 1161 – General-Purpose Relay Module National Instruments, Austin, Texas, USA 776572-61 Quantity: 6
Size: N/A
SCXI 1300 – General-Purpose Voltage Module National Instruments, Austin, Texas, USA 777687-00 Quantity: 1
Size: N/A
PCMCIA Card DAQCARD-AI-16E-4 National Instruments, Austin, Texas, USA N/A – legacy Quantity: 1
Size: N/A
used cards available online
sensor, optical backscatter – measure NTU in each aquarium Campbell Scientific Inc., Logan, UT, USA OBS-3+ Quantity: 5
Size: 0-1000 NTU

References

  1. National Research Council (NRC). A process for setting, managing, and monitoring environmental windows for dredging projects. Marine Board, Transportation Research Board, Special Report 262. , (2001).
  2. Suedel, B. C., Kim, J., Clarke, D. G., Linkov, I. A risk-informed decision framework for setting environmental windows for dredging projects. Sci Total Environ. 403, 1-11 (2008).
  3. Reine, K. J., Dickerson, D. D., Clarke, D. G. Environmental windows associated with dredging operations. DOER Technical Notes Collection. ERDC TN DOER-E2. , (1998).
  4. Wilber, D. H., Clarke, D. G. Biological effects of suspended sediments: A review of suspended sediment impacts on fish and shellfish with relation to dredging activities in estuaries. N Am J Fish Manag. 21, 855-875 (2001).
  5. Suedel, B. C., Lutz, C. H., Clarke, J. U., Clarke, D. G. The effects of suspended sediment on walleye (Sander vitreus) eggs. J. Soils Sediments. 12, 995-1003 (2012).
  6. Travis, J., Kring, J. . LabVIEW for Everyone: Graphical Programming Made Easy and Fun (National Instruments Virtual Instrumentation Series). , (2006).
  7. Hazardous Waste Test Methods/SW-846 On-line. Office of Solid Waste and Emergency Response (OSWER) Available from: https://www.epa.gov/hw-sw846/sw-846-compendium (2016)
  8. Plumb, R. H. . Procedure for handling and chemical analysis of sediment and water samples, EPA/CE-81-1. , (1981).
  9. Clarke, D. G., Wilber, D. H. . Assessment of potential impacts of dredging operations due to sediment resuspension. , (2000).
  10. Suedel, B. C., Clarke, J. U., Lutz, C. H., Clarke, D. G., Godard-Codding, C., Maul, J. Suspended sediment effects on walleye (Sander vitreus). J. Great Lakes Res. 40, 141-148 (2014).
  11. Wilkens, J. L., Katzenmeyer, A. W., Hahn, N. M., Hoover, J. J., Suedel, B. C. Laboratory test of suspended sediment effects on short-term survival and swimming performance of juvenile Atlantic Sturgeon (Acipenser oxyrinchus oxyrinchus). J. Appl. Ichthy. 31, 984-990 (2015).
  12. Suedel, B. C., Clarke, J. U., Wilkens, J., Lutz, C. H., Clarke, D. G. The effects of a simulated sediment plume on eastern oyster (Crassostrea virginica) survival, growth, and condition. Estuaries and Coasts. 38 (2), 578-589 (2015).
  13. Bilotta, G. S., Brazier, R. E. Understanding the influence of suspended solids on water chemistry and aquatic biota. Water Res. 42, 2849-2861 (2008).
  14. Reine, K., Clarke, D., Dickerson, C., Pickard, S. Assessment of potential impacts of bucket dredging plumes on walleye spawning habitat in Maumee Bay, Ohio. Proceedings of the 18th World Dredging Congress (WODCON XVIII). , (2007).

Play Video

Cite This Article
Suedel, B. C., Wilkens, J. L. A Flow-through Exposure System for Evaluating Suspended Sediments Effects on Aquatic Life. J. Vis. Exp. (119), e54937, doi:10.3791/54937 (2017).

View Video